LAMMPS WWW Site - LAMMPS Documentation - LAMMPS Commands

pair_style born/coul/long/cs command

pair_style buck/coul/long/cs command

Syntax:

pair_style style args 
  born/coul/long/cs args = cutoff (cutoff2)
    cutoff = global cutoff for non-Coulombic (and Coulombic if only 1 arg) (distance units)
    cutoff2 = global cutoff for Coulombic (optional) (distance units)
  buck/coul/long/cs args = cutoff (cutoff2)
    cutoff = global cutoff for Buckingham (and Coulombic if only 1 arg) (distance units)
    cutoff2 = global cutoff for Coulombic (optional) (distance units) 

Examples:

pair_style born/coul/long/cs 10.0 8.0
pair_coeff 1 1 6.08 0.317 2.340 24.18 11.51 
pair_style buck/coul/long/cs 10.0
pair_style buck/coul/long/cs 10.0 8.0
pair_coeff * * 100.0 1.5 200.0
pair_coeff 1 1 100.0 1.5 200.0 9.0 

Description:

These pair styles are designed to be used with the adiabatic core/shell model of (Mitchell and Finchham). See Section_howto 25 of the manual for an overview of the model as implemented in LAMMPS.

These pair styles are identical to the pair_style born/coul/long and pair_style buck/coul/long styles, except they correctly treat the special case where the distance between two charged core and shell atoms in the same core/shell pair approach r = 0.0. This needs special treatment when a long-range solver for Coulombic interactions is also used, i.e. via the kspace_style command.

More specifically, the short-range Coulomb interaction between a core and its shell should be turned off using the special_bonds command by setting the 1-2 weight to 0.0, which works because the core and shell atoms are bonded to each other. This induces a long-range correction approximation which fails at small distances (~< 10e-8). Therefore, the Coulomb term which is used to calculate the correction factor is extended by a minimal distance (r_min = 1.0-6) when the interaction between a core/shell pair is treated, as follows

where C is an energy-conversion constant, Qi and Qj are the charges on the core and shell, epsilon is the dielectric constant and r_min is the minimal distance.

Restrictions:

These pair styles are part of the CORESHELL package. They are only enabled if LAMMPS was built with that package. See the Making LAMMPS section for more info.

Related commands:

pair_coeff, pair_style born, pair_style buck

Default: none


(Mitchell and Finchham) Mitchell, Finchham, J Phys Condensed Matter, 5, 1031-1038 (1993).