EasyMock 3.2 Readme

Documentation for release 3.2 (2013-07-11)
© 2001-2013 OFFIS, Tammo Freese, Henri Tremblay.

EasyMock is a library that provides an easy way to use Mock Objects for given interfaces or classes. EasyMock is available under the terms of the Apache 2 license.

Mock Objects simulate parts of the behavior of domain code, and are able to check whether they are used as defined. Domain classes can be tested in isolation by simulating their collaborators with Mock Objects.

Writing and maintaining Mock Objects often is a tedious task that may introduce errors. EasyMock generates Mock Objects dynamically - no need to write them, and no generated code!

EasyMock Benefits

• Hand-writing classes for Mock Objects is not needed.
• Supports refactoring-safe Mock Objects: test code will not break at runtime when renaming methods or reordering method parameters
• Supports return values and exceptions.
• Supports checking the order of method calls, for one or more Mock Objects.

Requirements

• EasyMock only works with Java 1.5.0 and above.
• cglib (2.2) and Objenesis (1.2) must be in the classpath to perform class mocking

Installation

Using Maven

    <dependency>
      <groupId>org.easymock</groupId>
      <artifactId>easymock</artifactId>
      <version>3.2</version>
      <scope>test</scope>
    </dependency>

Manually

• Unzip the EasyMock zip file (easymock-3.2.zip).
• Go into the easymock-3.2 directory.
• Add the EasyMock jar file (easymock.jar) to your classpath.
• To perform class mocking, also add Objenesis and Cglib to your classpath.
• The tests are in easymock-3.2-tests.jar and can be launched with a JUnit TestRunner having JUnit 4.7 on top of EasyMock, cglib and Objenesis in your classpath.
• The source code of EasyMock is stored in easymock-3.2-sources.jar.

Usage

Most parts of a software system do not work in isolation, but collaborate with other parts to get their job done. In a lot of cases, we do not care about using collaborators in unit testing, as we trust these collaborators. If we do care about it, Mock Objects help us to test the unit under test in isolation. Mock Objects replace collaborators of the unit under test.

The following examples use the interface Collaborator:

package org.easymock.samples;

public interface Collaborator {
    void documentAdded(String title);
    void documentChanged(String title);
    void documentRemoved(String title);
    byte voteForRemoval(String title);
    byte[] voteForRemovals(String[] title);
}

Implementors of this interface are collaborators (in this case listeners) of a class named ClassUnderTest:

public class ClassUnderTest {

    private Collaborator listener;
    // ...
    public void setListener(Collaborator listener) {
        this.listener = listener;
    }
    public void addDocument(String title, byte[] document) { 
        // ... 
    }
    public boolean removeDocument(String title) {
        // ... 
    }
    public boolean removeDocuments(String[] titles) {
        // ... 
    }
}

The code for both the class and the interface may be found in the package org.easymock.samples in easymock-3.2-samples.jar from the EasyMock zip delivery.

The following examples assume that you are familiar with the JUnit testing framework. Although the tests shown here use JUnit 4, you may as well use JUnit 3 or TestNG.

The first Mock Object

We will now build a test case and toy around with it to understand the functionality of the EasyMock package. easymock-3.2-samples.jar contains a modified version of this test. Our first test should check whether the removal of a non-existing document does not lead to a notification of the collaborator. Here is the test without the definition of the Mock Object:

package org.easymock.samples;

import org.junit.*;

public class ExampleTest {

    private ClassUnderTest classUnderTest;
    private Collaborator mock;

    @Before
    public void setUp() {
        classUnderTest = new ClassUnderTest();
        classUnderTest.setListener(mock);
    }

    @Test
    public void testRemoveNonExistingDocument() {    
        // This call should not lead to any notification
        // of the Mock Object: 
        classUnderTest.removeDocument("Does not exist");
    }
}

For many tests using EasyMock, we only need a static import of methods of org.easymock.EasyMock.

import static org.easymock.EasyMock.*;
import org.junit.*;

public class ExampleTest {

    private ClassUnderTest classUnderTest;
    private Collaborator mock;
    
}    

To get a Mock Object, we need to

1. create a Mock Object for the interface we would like to simulate,
2. record the expected behavior, and
3. switch the Mock Object to replay state.

Here is a first example:

    @Before
    public void setUp() {
        mock = createMock(Collaborator.class); // 1
        classUnderTest = new ClassUnderTest();
        classUnderTest.setListener(mock);
    }

    @Test
    public void testRemoveNonExistingDocument() {
        // 2 (we do not expect anything)
        replay(mock); // 3
        classUnderTest.removeDocument("Does not exist");
    }

After activation in step 3, mock is a Mock Object for the Collaborator interface that expects no calls. This means that if we change our ClassUnderTest to call any of the interface's methods, the Mock Object will throw an AssertionError:

java.lang.AssertionError: 
  Unexpected method call documentRemoved("Does not exist"):
    at org.easymock.internal.MockInvocationHandler.invoke(MockInvocationHandler.java:29)
    at org.easymock.internal.ObjectMethodsFilter.invoke(ObjectMethodsFilter.java:44)
    at $Proxy0.documentRemoved(Unknown Source)
    at org.easymock.samples.ClassUnderTest.notifyListenersDocumentRemoved(ClassUnderTest.java:74)
    at org.easymock.samples.ClassUnderTest.removeDocument(ClassUnderTest.java:33)
    at org.easymock.samples.ExampleTest.testRemoveNonExistingDocument(ExampleTest.java:24)
    ...

Using annotations

Since EasyMock 3.2, it is now possible to create mocks using annotations. This is a nice and shorter way to create your mocks and inject them to the tested class. Here is the example above, now using annotations:

import static org.easymock.EasyMock.*;

import org.easymock.EasyMockRunner;
import org.easymock.TestSubject;
import org.easymock.Mock;
import org.junit.Test;
import org.junit.runner.RunWith;

@RunWith(EasyMockRunner.class)
public class ExampleTest {

    @TestSubject
    private ClassUnderTest classUnderTest = new ClassUnderTest(); // 2

    @Mock
    private Collaborator mock; // 1

    @Test
    public void testRemoveNonExistingDocument() {
        replay(mock);
        classUnderTest.removeDocument("Does not exist");
    }
}

The mock is instantiated by the runner at step 1. It is then set by the runner, to the listener field on step 2. The setUp method can be removed since all the initialisation was done by the runner.

Adding Behavior

Let us write a second test. If a document is added on the class under test, we expect a call to mock.documentAdded() on the Mock Object with the title of the document as argument:

    @Test
    public void testAddDocument() {
        mock.documentAdded("New Document"); // 2
        replay(mock); // 3
        classUnderTest.addDocument("New Document", new byte[0]); 
    }

So in the record state (before calling replay), the Mock Object does not behave like a Mock Object, but it records method calls. After calling replay, it behaves like a Mock Object, checking whether the expected method calls are really done.

If classUnderTest.addDocument("New Document", new byte[0]) calls the expected method with a wrong argument, the Mock Object will complain with an AssertionError:

java.lang.AssertionError: 
  Unexpected method call documentAdded("Wrong title"):
    documentAdded("New Document"): expected: 1, actual: 0
    at org.easymock.internal.MockInvocationHandler.invoke(MockInvocationHandler.java:29)
    at org.easymock.internal.ObjectMethodsFilter.invoke(ObjectMethodsFilter.java:44)
    at $Proxy0.documentAdded(Unknown Source)
    at org.easymock.samples.ClassUnderTest.notifyListenersDocumentAdded(ClassUnderTest.java:61)
    at org.easymock.samples.ClassUnderTest.addDocument(ClassUnderTest.java:28)
    at org.easymock.samples.ExampleTest.testAddDocument(ExampleTest.java:30)
    ...

All missed expectations are shown, as well as all fulfilled expectations for the unexpected call (none in this case). If the method call is executed too often, the Mock Object complains, too:

java.lang.AssertionError: 
  Unexpected method call documentAdded("New Document"):
    documentAdded("New Document"): expected: 1, actual: 2
    at org.easymock.internal.MockInvocationHandler.invoke(MockInvocationHandler.java:29)
    at org.easymock.internal.ObjectMethodsFilter.invoke(ObjectMethodsFilter.java:44)
    at $Proxy0.documentAdded(Unknown Source)
    at org.easymock.samples.ClassUnderTest.notifyListenersDocumentAdded(ClassUnderTest.java:62)
    at org.easymock.samples.ClassUnderTest.addDocument(ClassUnderTest.java:29)
    at org.easymock.samples.ExampleTest.testAddDocument(ExampleTest.java:30)
    ...

Verifying Behavior

There is one error that we have not handled so far: If we specify behavior, we would like to verify that it is actually used. The current test would pass if no method on the Mock Object is called. To verify that the specified behavior has been used, we have to call verify(mock):

    @Test
    public void testAddDocument() {
        mock.documentAdded("New Document"); // 2 
        replay(mock); // 3
        classUnderTest.addDocument("New Document", new byte[0]);
        verify(mock);
    }

If the method is not called on the Mock Object, we now get the following exception:

java.lang.AssertionError: 
  Expectation failure on verify:
    documentAdded("New Document"): expected: 1, actual: 0
    at org.easymock.internal.MocksControl.verify(MocksControl.java:70)
    at org.easymock.EasyMock.verify(EasyMock.java:536)
    at org.easymock.samples.ExampleTest.testAddDocument(ExampleTest.java:31)
    ...

The message of the exception lists all missed expectations.

Expecting an Explicit Number of Calls

Up to now, our test has only considered a single method call. The next test should check whether the addition of an already existing document leads to a call to mock.documentChanged() with the appropriate argument. To be sure, we check this three times (hey, it is an example ;-)):

    @Test
    public void testAddAndChangeDocument() {
        mock.documentAdded("Document");
        mock.documentChanged("Document");
        mock.documentChanged("Document");
        mock.documentChanged("Document");
        replay(mock);
        classUnderTest.addDocument("Document", new byte[0]);
        classUnderTest.addDocument("Document", new byte[0]);
        classUnderTest.addDocument("Document", new byte[0]);
        classUnderTest.addDocument("Document", new byte[0]);
        verify(mock);
    }

To avoid the repetition of mock.documentChanged("Document"), EasyMock provides a shortcut. We may specify the call count with the method times(int times) on the object returned by expectLastCall(). The code then looks like:

    @Test
    public void testAddAndChangeDocument() {
        mock.documentAdded("Document");
        mock.documentChanged("Document");
        expectLastCall().times(3);
        replay(mock);
        classUnderTest.addDocument("Document", new byte[0]);
        classUnderTest.addDocument("Document", new byte[0]);
        classUnderTest.addDocument("Document", new byte[0]);
        classUnderTest.addDocument("Document", new byte[0]);
        verify(mock);
    }

If the method is called too often, we get an exception that tells us that the method has been called too many times. The failure occurs immediately at the first method call exceeding the limit:

java.lang.AssertionError: 
  Unexpected method call documentChanged("Document"):
    documentChanged("Document"): expected: 3, actual: 4
	at org.easymock.internal.MockInvocationHandler.invoke(MockInvocationHandler.java:29)
	at org.easymock.internal.ObjectMethodsFilter.invoke(ObjectMethodsFilter.java:44)
	at $Proxy0.documentChanged(Unknown Source)
	at org.easymock.samples.ClassUnderTest.notifyListenersDocumentChanged(ClassUnderTest.java:67)
	at org.easymock.samples.ClassUnderTest.addDocument(ClassUnderTest.java:26)
	at org.easymock.samples.ExampleTest.testAddAndChangeDocument(ExampleTest.java:43)
    ...

If there are too few calls, verify(mock) throws an AssertionError:

java.lang.AssertionError: 
  Expectation failure on verify:
    documentChanged("Document"): expected: 3, actual: 2
	at org.easymock.internal.MocksControl.verify(MocksControl.java:70)
	at org.easymock.EasyMock.verify(EasyMock.java:536)
	at org.easymock.samples.ExampleTest.testAddAndChangeDocument(ExampleTest.java:43)
    ...

Specifying Return Values

For specifying return values, we wrap the expected call in expect(T value) and specify the return value with the method andReturn(Object returnValue) on the object returned by expect(T value).

As an example, we check the workflow for document removal. If ClassUnderTest gets a call for document removal, it asks all collaborators for their vote for removal with calls to byte voteForRemoval(String title) value. Positive return values are a vote for removal. If the sum of all values is positive, the document is removed and documentRemoved(String title) is called on all collaborators:

    @Test
    public void testVoteForRemoval() {
        mock.documentAdded("Document");   // expect document addition
        // expect to be asked to vote for document removal, and vote for it
        expect(mock.voteForRemoval("Document")).andReturn((byte) 42);
        mock.documentRemoved("Document"); // expect document removal
        replay(mock);
        classUnderTest.addDocument("Document", new byte[0]);
        assertTrue(classUnderTest.removeDocument("Document"));
        verify(mock);
    }

    @Test
    public void testVoteAgainstRemoval() {
        mock.documentAdded("Document");   // expect document addition
        // expect to be asked to vote for document removal, and vote against it
        expect(mock.voteForRemoval("Document")).andReturn((byte) -42);
        replay(mock);
        classUnderTest.addDocument("Document", new byte[0]);
        assertFalse(classUnderTest.removeDocument("Document"));
        verify(mock);
    }

The type of the returned value is checked at compile time. As an example, the following code will not compile, as the type of the provided return value does not match the method's return value:

    expect(mock.voteForRemoval("Document")).andReturn("wrong type");

Instead of calling expect(T value) to retrieve the object for setting the return value, we may also use the object returned by expectLastCall(). Instead of

    expect(mock.voteForRemoval("Document")).andReturn((byte) 42);

we may use

    mock.voteForRemoval("Document");
    expectLastCall().andReturn((byte) 42);

This type of specification should only be used if the line gets too long, as it does not support type checking at compile time.

Working with Exceptions

For specifying exceptions (more exactly: Throwables) to be thrown, the object returned by expectLastCall() and expect(T value) provides the method andThrow(Throwable throwable). The method has to be called in record state after the call to the Mock Object for which it specifies the Throwable to be thrown.

Unchecked exceptions (that is, RuntimeException, Error and all their subclasses) can be thrown from every method. Checked exceptions can only be thrown from the methods that do actually throw them.

Creating Return Values or Exceptions

Sometimes we would like our mock object to return a value or throw an exception that is created at the time of the actual call. Since EasyMock 2.2, the object returned by expectLastCall() and expect(T value) provides the method andAnswer(IAnswer answer) which allows to specify an implementation of the interface IAnswer that is used to create the return value or exception.

Inside an IAnswer callback, the arguments passed to the mock call are available via EasyMock.getCurrentArguments(). If you use these, refactorings like reordering parameters may break your tests. You have been warned.

An alternative to IAnswer are the andDelegateTo and andStubDelegateTo methods. They allow to delegate the call to a concrete implementation of the mocked interface that will then provide the answer. The pros are that the arguments found in EasyMock.getCurrentArguments() for IAnswer are now passed to the method of the concrete implementation. This is refactoring safe. The cons are that you have to provide an implementation which is kind of doing a mock manually... Which is what you try to avoid by using EasyMock. It can also be painful if the interface has many methods. Finally, the type of the concrete class can't be checked statically against the mock type. If for some reason, the concrete class isn't implementing the method that is delegated, you will get an exception during the replay only. However, this case should be quite rare.

To understand correctly the two options, here is an example:

    List<String> l = createMock(List.class);

    // andAnswer style
    expect(l.remove(10)).andAnswer(new IAnswer<String>() {
        public String answer() throws Throwable {
            return getCurrentArguments()[0].toString();
        }
    });

    // andDelegateTo style
    expect(l.remove(10)).andDelegateTo(new ArrayList<String>() {
        @Override
        public String remove(int index) {
            return Integer.toString(index);
        }
    });

Changing Behavior for the Same Method Call

It is also possible to specify a changing behavior for a method. The methods times, andReturn, and andThrow may be chained. As an example, we define voteForRemoval("Document") to

• return 42 for the first three calls,
• throw a RuntimeException for the next four calls,
• return -42 once.

    expect(mock.voteForRemoval("Document"))
        .andReturn((byte) 42).times(3)
        .andThrow(new RuntimeException(), 4)
        .andReturn((byte) -42);

Relaxing Call Counts

To relax the expected call counts, there are additional methods that may be used instead of times(int count):

times(int min, int max)

to expect between min and max calls,

atLeastOnce()

to expect at least one call, and

anyTimes()

to expected an unrestricted number of calls.

If no call count is specified, one call is expected. If we would like to state this explicitely, once() or times(1) may be used.

Strict Mocks

On a Mock Object returned by a EasyMock.createMock(), the order of method calls is not checked. If you would like a strict Mock Object that checks the order of method calls, use EasyMock.createStrictMock() to create it.

If an unexpected method is called on a strict Mock Object, the message of the exception will show the method calls expected at this point followed by the first conflicting one. verify(mock) shows all missing method calls.

Switching Order Checking On and Off

Sometimes, it is necessary to have a Mock Object that checks the order of only some calls. In record phase, you may switch order checking on by calling checkOrder(mock, true) and switch it off by calling checkOrder(mock, false).

There are two differences between a strict Mock Object and a normal Mock Object:

1. A strict Mock Object has order checking enabled after creation.
2. A strict Mock Object has order checking enabled after reset (see Reusing a Mock Object).

Flexible Expectations with Argument Matchers

To match an actual method call on the Mock Object with an expectation, Object arguments are by default compared with equals(). This may lead to problems. As an example, we consider the following expectation:

String[] documents = new String[] { "Document 1", "Document 2" };
expect(mock.voteForRemovals(documents)).andReturn(42);

If the method is called with another array with the same contents, we get an exception, as equals() compares object identity for arrays:

java.lang.AssertionError: 
  Unexpected method call voteForRemovals([Ljava.lang.String;@9a029e):
    voteForRemovals([Ljava.lang.String;@2db19d): expected: 1, actual: 0
    documentRemoved("Document 1"): expected: 1, actual: 0
    documentRemoved("Document 2"): expected: 1, actual: 0
	at org.easymock.internal.MockInvocationHandler.invoke(MockInvocationHandler.java:29)
	at org.easymock.internal.ObjectMethodsFilter.invoke(ObjectMethodsFilter.java:44)
	at $Proxy0.voteForRemovals(Unknown Source)
	at org.easymock.samples.ClassUnderTest.listenersAllowRemovals(ClassUnderTest.java:88)
	at org.easymock.samples.ClassUnderTest.removeDocuments(ClassUnderTest.java:48)
	at org.easymock.samples.ExampleTest.testVoteForRemovals(ExampleTest.java:83)
    ...

To specify that only array equality is needed for this call, we may use the method aryEq that is statically imported from the EasyMock class:

String[] documents = new String[] { "Document 1", "Document 2" };
expect(mock.voteForRemovals(aryEq(documents))).andReturn(42);

If you would like to use matchers in a call, you have to specify matchers for all arguments of the method call.

There are a couple of predefined argument matchers available.

eq(X value)

Matches if the actual value is equals the expected value. Available for all primitive types and for objects.

anyBoolean(), anyByte(), anyChar(), anyDouble(), anyFloat(), anyInt(), anyLong(), anyObject(), anyObject(Class clazz), anyShort(), anyString()

Matches any value. Available for all primitive types and for objects.

eq(X value, X delta)

Matches if the actual value is equal to the given value allowing the given delta. Available for float and double.

aryEq(X value)

Matches if the actual value is equal to the given value according to Arrays.equals(). Available for primitive and object arrays.

isNull(), isNull(Class clazz)

Matches if the actual value is null. Available for objects.

notNull(), notNull(Class clazz)

Matches if the actual value is not null. Available for objects.

same(X value)

Matches if the actual value is the same as the given value. Available for objects.

isA(Class clazz)

Matches if the actual value is an instance of the given class, or if it is in instance of a class that extends or implements the given class. Null always return false. Available for objects.

lt(X value), leq(X value), geq(X value), gt(X value)

Matches if the actual value is less/less or equal/greater or equal/greater than the given value. Available for all numeric primitive types and Comparable.

startsWith(String prefix), contains(String substring), endsWith(String suffix)

Matches if the actual value starts with/contains/ends with the given value. Available for Strings.

matches(String regex), find(String regex)

Matches if the actual value/a substring of the actual value matches the given regular expression. Available for Strings.

and(X first, X second)

Matches if the matchers used in first and second both match. Available for all primitive types and for objects.

or(X first, X second)

Matches if one of the matchers used in first and second match. Available for all primitive types and for objects.

not(X value)

Matches if the matcher used in value does not match.

cmpEq(X value)

Matches if the actual value is equals according to Comparable.compareTo(X o). Available for all numeric primitive types and Comparable.

cmp(X value, Comparator<X> comparator, LogicalOperator operator)

Matches if comparator.compare(actual, value) operator 0 where the operator is <,<=,>,>= or ==. Available for objects.

capture(Capture<T> capture), captureXXX(Capture<T> capture)

Matches any value but captures it in the Capture parameter for later access. You can do and(someMatcher(...), capture(c)) to capture a parameter from a specific call to the method. You can also specify a CaptureType telling that a given Capture should keep the first, the last, all or no captured values.

Defining your own Argument Matchers

Sometimes it is desirable to define own argument matchers. Let's say that an argument matcher is needed that matches an exception if the given exception has the same type and an equal message. It should be used this way:

    IllegalStateException e = new IllegalStateException("Operation not allowed.")
    expect(mock.logThrowable(eqException(e))).andReturn(true);

Two steps are necessary to achieve this: The new argument matcher has to be defined, and the static method eqException has to be declared.

To define the new argument matcher, we implement the interface org.easymock.IArgumentMatcher. This interface contains two methods: matches(Object actual) checks whether the actual argument matches the given argument, and appendTo(StringBuffer buffer) appends a string representation of the argument matcher to the given string buffer. The implementation is straightforward:

import org.easymock.IArgumentMatcher;

public class ThrowableEquals implements IArgumentMatcher {
    private Throwable expected;

    public ThrowableEquals(Throwable expected) {
        this.expected = expected;
    }

    public boolean matches(Object actual) {
        if (!(actual instanceof Throwable)) {
            return false;
        }
        String actualMessage = ((Throwable) actual).getMessage();
        return expected.getClass().equals(actual.getClass())
                && expected.getMessage().equals(actualMessage);
    }

    public void appendTo(StringBuffer buffer) {
        buffer.append("eqException(");
        buffer.append(expected.getClass().getName());
        buffer.append(" with message \"");
        buffer.append(expected.getMessage());
        buffer.append("\"")");

    }
}

The method eqException must create the argument matcher with the given Throwable, report it to EasyMock via the static method reportMatcher(IArgumentMatcher matcher), and return a value so that it may be used inside the call (typically 0, null or false). A first attempt may look like:

public static Throwable eqException(Throwable in) {
    EasyMock.reportMatcher(new ThrowableEquals(in));
    return null;
}

However, this only works if the method logThrowable in the example usage accepts Throwables, and does not require something more specific like a RuntimeException. In the latter case, our code sample would not compile:

    IllegalStateException e = new IllegalStateException("Operation not allowed.")
    expect(mock.logThrowable(eqException(e))).andReturn(true);

Java 5.0 to the rescue: Instead of defining eqException with a Throwable as parameter and return value, we use a generic type that extends Throwable:

public static <T extends Throwable> T eqException(T in) {
    reportMatcher(new ThrowableEquals(in));
    return null;
}

Reusing a Mock Object

Mock Objects may be reset by reset(mock).

If needed, a mock can also be converted from one type to another by calling resetToNice(mock), resetToDefault(mock) ou resetToStrict(mock).

Using Stub Behavior for Methods

Sometimes, we would like our Mock Object to respond to some method calls, but we do not want to check how often they are called, when they are called, or even if they are called at all. This stub behavoir may be defined by using the methods andStubReturn(Object value), andStubThrow(Throwable throwable), andStubAnswer(IAnswer<Tgt; answer) and asStub(). The following code configures the MockObject to answer 42 to voteForRemoval("Document") once and -1 for all other arguments:

    expect(mock.voteForRemoval("Document")).andReturn(42);
    expect(mock.voteForRemoval(not(eq("Document")))).andStubReturn(-1);

Nice Mocks

On a Mock Object returned by createMock() the default behavior for all methods is to throw an AssertionError for all unexpected method calls. If you would like a "nice" Mock Object that by default allows all method calls and returns appropriate empty values (0, null or false), use createNiceMock() instead.

    IMyInterface mock = createStrictMock(IMyInterface.class);
    replay(mock);
    verify(mock); 
    reset(mock);

    IMocksControl ctrl = createStrictControl();
    IMyInterface mock = ctrl.createMock(IMyInterface.class);
    ctrl.replay();
    ctrl.verify(); 
    ctrl.reset();

    IMocksControl ctrl = createStrictControl();
    IMyInterface mock1 = ctrl.createMock(IMyInterface.class);
    IMyInterface mock2 = ctrl.createMock(IMyInterface.class);

    mock1.a();
    mock2.a();

    ctrl.checkOrder(false);

    mock1.c();
    expectLastCall().anyTimes();     
    mock2.c();
    expectLastCall().anyTimes();     

    ctrl.checkOrder(true);

    mock2.b();
    mock1.b();

    ctrl.replay();

public class SupportTest extends EasyMockSupport {

    private Collaborator firstCollaborator;
    private Collaborator secondCollaborator;
    private ClassTested classUnderTest;

    @Before
    public void setup() {
        classUnderTest = new ClassTested();
    }

    @Test
    public void addDocument() {
        // creation phase
        firstCollaborator = createMock(Collaborator.class);
        secondCollaborator = createMock(Collaborator.class);
        classUnderTest.addListener(firstCollaborator);
        classUnderTest.addListener(secondCollaborator);

        // recording phase
        firstCollaborator.documentAdded("New Document");
        secondCollaborator.documentAdded("New Document");
        
        replayAll(); // replay all mocks at once
        
        // test
        classUnderTest.addDocument("New Document", new byte[0]);
                
        verifyAll(); // verify all mocks at once
    }
}

ToMock mock = createMockBuilder(ToMock.class)
   .addMockedMethod("mockedMethod").createMock();

ToMock mock = createMockBuilder(ToMock.class)
   .withConstructor(1, 2, 3); // 1, 2, 3 are the constructor parameters

• To be coherent with interface mocking, EasyMock provides a built-in behavior for equals(), toString(), hashCode() and finalize() even for class mocking. It means that you cannot record your own behavior for these methods. This limitation is considered to be a feature that prevents you from having to care about these methods.
• Final methods cannot be mocked. If called, their normal code will be executed.
• Private methods cannot be mocked. If called, their normal code will be executed. During partial mocking, if your method under test is calling some private methods, you will need to test them as well since you cannot mock them.
• Class instantiation is performed using Objenesis. Supported JVMs are listed here.

Android support

Since EasyMock 3.2, EasyMock can be used on Android VM (Dalvik). Just add a dependency to you apk project used to test your application. It is a good idea to exclude cglib since dexmaker is used instead. You should also add dexmaker explicitly because it's an optional dependency. If you use Maven, the final required dependencies will look like this

<dependency>
  <groupId>org.easymock</groupId>
  <artifactId>easymock</artifactId>
  <version>3.2</version>
  <exclusions>
    <exclusion>
      <groupId>cglib</groupId>
      <artifactId>cglib-nodep</artifactId>
    </exclusion>
  </exclusions>
</dependency>
<dependency>
  <groupId>com.google.dexmaker</groupId>
  <artifactId>dexmaker</artifactId>
  <version>1.0</version>
</dependency>    

EasyMock Development

EasyMock has been developed by Tammo Freese at OFFIS. It is maintained by Henri Tremblay since 2007. The development of EasyMock is hosted on SourceForge to allow other developers and companies to contribute.

Class mocking (previously known as EasyMock Class Extension) was initially developed by Joel Shellman, Chad Woolley and Henri Tremblay on the files section of Yahoo!Groups.

Thanks to the people who gave feedback or provided patches, including Nascif Abousalh-Neto, Dave Astels, Francois Beausoleil, George Dinwiddie, Shane Duan, Wolfgang Frech, Steve Freeman, Oren Gross, John D. Heintz, Dale King, Brian Knorr, Dierk Koenig, Chris Kreussling, Robert Leftwich, Patrick Lightbody, Johannes Link, Rex Madden, David McIntosh, Karsten Menne, Bill Michell, Stephan Mikaty, Ivan Moore, Ilja Preuss, Justin Sampson, Markus Schmidlin, Richard Scott, Joel Shellman, Jiří Mareš, Alexandre de Pellegrin Shaun Smith, Marco Struck, Ralf Stuckert, Victor Szathmary, Bill Uetrecht, Frank Westphal, Chad Woolley, Bernd Worsch, Rodrigo Damazio, Bruno Fonseca, Ben Hutchison and numerous others.

Please check the EasyMock home page for new versions, and send bug reports and suggestions to the EasyMock Yahoo!Group. If you would like to subscribe to the EasyMock Yahoo!Group, send a message to easymock-subscribe@yahoogroups.com.